Table of Contents
Advertisement
1. Connect the appropriate interface cable to the scanner first, then to the com-
puter.
2. Program the scanner for a USB interface using the Plug and Play barcodes
below.
3. The scanner beeps.
4. Verify the scanner operation by scanning a barcode from the
Symbols
in the back of this manual.
For additional USB programming and technical information, refer to "USB Appli-
cation Note," available at
Scan one of the following "Plug and Play" codes to program the 3800 for IBM
SurePos (USB Handheld scanner) or IBM SurePos (USB Tabletop scanner).
Note: After scanning one of these codes, you must re-boot the cash register.
IBM SurePos (USB Handheld Scanner) Interface
IBM SurePos (USB Tabletop Scanner) Interface
Each barcode above also programs the following suffixes for each symbology:
www.honeywell.com/aidc.
Symbology
EAN 8
Suffix
0C
Sample
1 - 9
Advertisement
Table of Contents
