When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar barcodes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16 and Transmit
Concatenation
Codabar supports symbol concatenation. When you Enable concatenation,
the scanner looks for a Codabar symbol having a "D" start character, adjacent
to a symbol having a "D" stop character. In this case the two messages are
concatenated into one with the "D" characters omitted. Default = On.
Character
Start
Stop
Start
Stop
Codabar
A12D
D34A
Select Require to prevent the scanner from decoding a lone Codabar symbol.
* On
Off
Require
7 - 4