Searching For A Destination - Oce im7520 User Manual

5
4
Touch [OK].
Note
If the "Manual Destination Input" parameter on the Security Details
screen (displayed by touching [Security Setting] on the Administrator
Setting screen) is set to "Restrict", [LDAP Search] does not appear.
An LDAP search is possible only if "Select from Address Book" was se-
lected.

Searching for a Destination

Follow the procedure described below to search for the desired destination.
- Detail Search
Type in the name of the destination or part of the address to search for
the corresponding address.
- LDAP Search
Search the addresses registered in the LDAP server for the address that
corresponds to the conditions.
To perform a Basic Search, type in the search text. To search with multi-
ple conditions, perform a Advanced Search.
For a Basic Search
5-10
Routing a Document from the System User Box
im7520/im6020