Specifying Hdd Setting Parameters - Oce im7520 User Manual

Control Panel Settings
6.6

Specifying HDD Setting Parameters

Various hard disk operations are available, such as those for erasing data
from the hard disk and for checking the amount of free space on the hard
disk.
The following parameters are available.
Parameter
Check HDD Capacity
Temporary Data Over-
write Setting
Overwrite All Data
HDD Lock Password
HDD Formatting
HDD Encryption Setting
!
Detail
The following data is erased when the hard disk is formatted.
Program destinations
Abbreviated destinations
Authentication method settings
User authentication settings
Account track settings
User boxes
Box settings
Documents in boxes
Secure print user box settings
Bulletin board user box settings
im7520/im6020
Description
Displays the amount of hard disk space that is used and remaining
Select either "Mode 1" or "Mode 2" as the method for overwriting
data on the hard disk.
Overwrites all data
Specifies the hard disk locking password
Formats the hard disk.
Image Data Encryption
Key
Management Data En-
cryption Key
Encrypt image data saved in boxes on
the hard disk. This can be specified only
if the hard disk drive and security kit are
installed.
Encrypt management data such as the
settings on the Utility mode and user/ac-
count registration data. This can be
specified even if the hard disk drive and
security kit are not installed.
6
6-15