Charging Spare Batteries - Motorola MC9190-G User Manual

1 - 4 MC9190-G User Guide
•
Cradles: The MC9190-G slips into the cradles for charging the battery in the MC9190-G (and spare batteries,
where applicable). For detailed cradle setup and charging procedures refer to the MC9190 Integrator Guide.
• Single Slot Serial/USB Cradle.
• Four Slot Ethernet Cradle
• Four Slot Charge Only Cradle.
•
Accessories: The MC9190-G snap-on accessories provide charging capability, when used with one of the
accessory charging cables. For detailed snap-on setup and charging procedures refer to the MC9190
Integrator Guide.
• CAM
• MSR.
•
Chargers: The MC9190-G spare battery charging accessories are used to charge batteries that are removed
from the MC9190-G. For detailed spare battery charging accessories setup and charging procedures refer to
the MC9190 Integrator Guide.
• Single Slot Serial/USB Cradle
• Four Slot Spare Battery Charger
• Universal Battery Charger (UBC) Adapter.
NOTE To achieve the best battery life in MC9190-Gs with multiple radios, turn off the radios that are not being used.
See
To charge the main battery:
Ensure the accessory used to charge the main battery is connected to the appropriate power source.
1.
Insert the MC9190-G into a cradle or attach the appropriate snap-on module.
2.
The MC9190-G starts to charge automatically. The amber charge LED, in the Indicator LED Bar, lights to
3.
indicate the charge status. See
The main battery usually fully charges in less than four hours.
MC9190-G LED Charge Indicators
Table 1-1
LED
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber

Charging Spare Batteries

Use the following three accessories to charge spare batteries:
•
Single Slot Serial/USB Cradle
Turning Off the Radios on page 1-8
Table 1-1
MC9190-G not in cradle or connected to a CAM or MSR. MC9190-G not placed correctly.
Charger is not powered.
Error in charging; check placement of the MC9190-G.
MC9190-G is charging.
Charging complete.
Note: When the battery is initially inserted in the MC9190-G, the amber LED flashes once if
the battery power is low or the battery is not fully inserted.
for more information.
for charging indications.
Indication