Headset Services - Motorola MC9190-G User Manual

Send Local Picture Window
Figure 4-16
Navigate to the picture to send to the other device.
4.
Tap Open.
5.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
6.
accept the picture. A Send Picture dialog appears.
Tap Ok.
7.

Headset Services

To connect to a Bluetooth headset:
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Ensure the MC9190-G is connectable (required when automatic re-connect is initiated). See
1.
on page 4-27.
Ensure that the Headset profile is enabled on the MC9190-G. See
2.
information.
Use the Connection Wizard to search for a Bluetooth headset.
3.
Select the device and tap Next.
4.
Select the Headset service name and select Connect. The MC9190-G connects to the headset. Refer to the
5.
headset user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC9190-G.
Press the communication button on the headset. This routes system audio to the headset.
6.
Press the communication button on the headset to route the audio back to the MC9190-G.
7.
Using Bluetooth 4 - 23
Device Info Tab
Profiles Tab on page 4-31 for more