Activesync Using Serial Port Services - Motorola MC9190-G User Manual

4 - 8 MC9190-G User Guide
Tap Next.
6.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
7.
In the device list, tap the serial device. The Partnership Settings window displays.
8.
Select the Serial Port checkbox.
9.
Tap Save.
10.
Tap COM Ports tab.
11.
Tap New Outgoing Port.
12.
Select the serial device in the list and then tap Next.
13.
Select a COM port from the drop-down list.
14.
Tap Finish.
15.
NOTE No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.

ActiveSync Using Serial Port Services

Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
To set up a Bluetooth ActiveSync connection:
Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device.
NOTE For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more information
on network bridging, see Windows Help on your computer.
The instructions below are for computers that support the Windows XP SP2 or later version operating system.
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 32.8 feet (10 meters) of one another.
2.
On the computer, click Start > Settings > Control Panel.
3.
Double-click Bluetooth Devices.
4.
On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this
5.
computer checkboxes.