Chapter 3 Data Capture
The MC9190-G has integrated laser scanners or imagers that collect data by scanning bar codes.
•
Standard Range Laser
•
Long Range Laser
•
Standard Range Imager (standard range, high density (DPM) or driver license)
•
Long Range Imager.
Scan LED Indicators
The red/green Scan LED Indicators (located in the Indicator LED Bar) indicates the scan status. For the location of
the Scan LED Indicators see,
Scan LED Indicators
Table 3-1
LED Status
Off
Solid Red
Solid Green
Laser Scanning
To read a bar code, a scan-enabled application is required. The MC9190-G with Windows Mobile contains the
DataWedge application and MC9190-G with Windows CE contains the DataWedge and ScanSamp2 Example
applications that allows the user to enable the scanner to decode bar code data and display the bar code content.
See
DataWedge on page 3-5
launching ScanSamp2 Example.
Launch a scanning application or a sample scanning application (DataWedge or ScanSamp2 Example).
1.
Point the exit window on the top of the MC9190-G at a bar code.
2.
Figure 1-1 on page
1-2.
Not scanning.
Laser enabled, scanning in process.
Successful decode.
for information on launching DataWedge and
Indication
ScanSamp2 Example on page 3-5
for