Motorola MC9190-G User Manual page 141

28-Key Descriptions
Table C-1
Key
Power (red)
Green/Red Dot
Scan (yellow)
Scroll Up and Down
Scroll Left and Right
ESC
One/Star
Alphanumeric
GHI JKL MNO
4 5 6
Turns the MC9190-G on and off.
Performs a warm boot and a cold boot. See
performing a warm and cold boot.
To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be
created and installed. However, the Green/Red dot keys can be remapped as APP keys through the
registry.
Create an XML Provisioning file with the following entries:
Characteristic type ="HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD"
Parm name = "GreenKeyOverride" value = "xx", where xx is the new APP key code.
Parm name = "RedKeyOverride" value = "xx", where xx is the new APP key code.
Refer to the MC9190-G Integrator Guide for instruction on updating the registry using XML Provisioning.
This sends an APP key code, instead of their original key codes, when the green or red dot key is
pressed.
Activates the scanner/imager in a scan enabled application.
Moves up and down from one item to another.
Increases/decreases specified values.
Moves left and right from one item to another.
Increases/decreases specified values.
Exits the current operation.
Produces the number one in default state.
Produces an asterisk in Alpha state.
In default state, produces the numeric value on the key.
In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the
next alphabetic character in sequence. For example, press and release the ALPHA key and then press
the '4' key once to produce the letter 'g'; press and release the ALPHA key and then press the '4' key
three times to produce the letter 'i'.
When the SHIFT key is pressed in Alpha state, the upper case alphabetic characters on the key are
produced. For example, press and release the ALPHA key, press and release the SHIFT key and then
press the '4' key once to produce the letter 'G'; press and release the ALPHA key, press and release the
SHIFT key and then press the '4' key three times to produce the letter 'I'.
Description
Resetting the MC9190-G on page 2-22
Keypads C - 3
for information about