Editing; Controlling Track Display On C|24 - DigiDesign C 24 Manual

Editing

Selecting Edit Tools
You can select Edit tools by pressing the corre-
sponding switches in the Tools & Functions sec-
tion of C|24: Trim, Select, Grabber, Pencil, Smart
Tool. The following Edit tool functions are also
available:
To cycle through available versions of an Edit tool:
Press the corresponding Edit tool switch to cy-
cle through the versions of the tool.
To select the Smart Tool:
Press any combination of the Trim, Select,
and Grabber switches.
To lock and unlock Shuffle mode:
While in any Edit mode other than Shuffle
mode, hold the Command/Ctrl Modifier switch
and press the Shuffle switch.
Cutting and Pasting
To copy the current edit selection:
Press the Copy switch.
To paste a copied edit selection:
Press the Paste switch.
To copy the current plug-in settings:
Focus the plug-in whose settings you want to
1
copy. (For information on focusing plug-ins, see
"Focusing Plug-Ins on C|24" on page 74.)
Hold the Shift (add) Modifier switch and press
2
the Copy switch.
To paste copied plug-in settings:
Focus the plug-in where you want to paste
1
copied settings. (For information on focusing
plug-ins, see "Focusing Plug-Ins on C|24" on
page 74.)
Hold the Shift (add) Modifier switch and press
2
the Paste switch.
Undoing Pro Tools Operations
To undo an action:
Press the Undo switch.
To redo an action:
Press the Redo switch.
Controlling Track Display on
C|24
Banking and Nudging Tracks
To bank the position of tracks on C|24 forward or
backward 24 channels at a time:
Press the lit Bank Left or Bank Right switch.
To nudge the position of tracks on C|24 one
channel at a time:
Press the Nudge switch so that it is lit.
1
Press the Bank Left or the Bank Right switch.
2
To cascade the position of tracks on C|24 one
channel at a time:
Hold any of the Nudge/Bank switches and
turn the Scrub/Shuttle wheel clockwise or coun-
terclockwise.
Chapter 9: Working with C|24 97