Chapter 9: Working With C|24; Working With Sessions And Tracks - DigiDesign C 24 Manual

Chapter 9: Working with C|24

This chapter covers representative Pro Tools
tasks that can be accomplished with C|24. For
complete information on C|24 controls for
Pro Tools, see Chapter 6, "C|24 Pro Tools Con-
trols." For complete information on the views
and modes available on C|24, see Chapter 8,
"Operating Views and Modes."
Working with Sessions and
Tracks
Saving a Session
To save the current session:
Press the Save switch. The switch flashes,
1
prompting confirmation of the Save command.
Do one of the following:
2
• To confirm the Save command, press the
Save switch again.
– or –
• To cancel the Save command, press the
Esc/Cancel switch.
Creating New Tracks
When you are creating new tracks in Pro Tools,
you can navigate the New Tracks dialog using
the Arrow switches on C}24.
To increase or decrease the number of tracks:
Press the Up or Down Arrow switch.
To scroll through the track types:
Hold the Command/Ctrl Modifier switch and
press the Up or Down Arrow switch.
To scroll through the track formats:
Hold the Command/Ctrl Modifier switch and
press the Previous (Left) or Next (Right) Arrow
switch.
To toggle the timebases:
Hold the Command/Ctrl+Opt/Alt (all) Modi-
fier switches and press the Up or Down Arrow
switches.
Naming Tracks or Adding Track
Comments
When you are naming tracks or adding track
comments, you can open and navigate the
Name Track dialog from C|24.
Chapter 9: Working with C|24 85