Global Controls - DigiDesign C 24 Manual

Global Controls

Do To
Selected
switch
Do To All Default
switch switch
Global controls
Do To All and Do To Selected Switches
The Do To All and the Do To Selected switches
are used to apply actions to multiple tracks in a
Pro Tools session.
The Do To All and Do To Selected switches can
follow momentary or latching behavior.
When single-pressed, their effect applies only
to the next operation.
When held, they apply to all operations car-
ried out while being held.
When double-pressed, they latch on and flash
until pressed a second time.
Default Switch
The Default switch is used to reset displayed pa-
rameters to their default values.
The Default switch can follow momentary or
latching behavior. When single-pressed, its ef-
fect applies only to the next operation. When
double-pressed, it latches on and flashes until
pressed a second time.
48 C|24 Guide
Solo Clear Vel Sens
switch switch
Plug-in Safe Input Mon
switch switch
Solo Clear Switch
The Solo Clear switch clears all latched Solo
switches in the session. This switch flashes
when any channel is soloed.
Plug-in Safe Switch
Master Rec
switch
The Plug-in Safe switch enables plug-in automa-
tion safe mode for the currently focused plug-in.
This switch is lit when an automation safe plug-
in is focused.
Velocity Sensitive Switch
The Velocity Sensitive (Vel Sens) switch toggles
all Rotary Encoders between fixed-velocity
mode and velocity sensitive mode, where the re-
sponsiveness of the encoder is proportional to
the speed of rotation.
Input Monitor Switch
(Pro Tools HD Only)
The Input Monitor Switch toggles the Input
Monitor option between "Set Record Tracks to
Auto Input" and "Set Record Tracks to To Input
Only" on all record-enabled tracks.
Master Record Enable Switch
The Master Record Enable switch toggles record
enable status for all applicable audio tracks in a
session. This switch flashes when channels are
record-enabled and the Pro Tools transport is
stopped, and lights continuously during record-
ing.