Mic Pre View - DigiDesign C 24 Manual

To target controls for a specific channel on a multi-
mono plug-in:
From the multi-mono plug-in setup page:,
1
press the encoder switch that corresponds to
"Target."
Press the encoder switch that corresponds to
2
the channel you want to target, which can in-
clude Left, Center, Right, Left Surround, Right
Surround, or LFE.
To link the controls of specific channels on a multi-
mono plug-in:
From the multi-mono plug-in setup page:,
1
press the encoder switch that corresponds to
"Group."
Press the encoder switches that correspond to
2
the channels of the plug-in you want to group,
which can include Left, Center, Right, Left Sur-
round, Right Surround, and LFE.
To bypass channels on a multi-mono plug-in:
From the multi-mono plug-in setup page:,
1
press the encoder switch that corresponds to
"Bypass."
Press the encoder switches that correspond to
2
the channels of the plug-in you want to bypass,
which can include Left, Center, Right, Left Sur-
round, Right Surround, and LFE.
To exit the multi-mono plug-in Setup page:
Press the flashing Insert/Param switch.
To exit Parameter view, do any of the following:
Press the flashing Insert switch in the track's
channel strip.
Press the Insert/Param switch in the Inserts
section of the Channel Bar.
Enter another view.
78 C|24 Guide

Mic Pre View

If you have a Digidesign PRE in your system, Mic
Pre views let you control the PRE from C|24.
Mic Pre Console View
To display PRE gain values across all channels:
Press the Mic Pre switch.
The track name is displayed in the top row, and
the Gain value (in dB) is displayed in the bottom
row, prefaced by one of the following:
• MGn: Microphone gain
• LGn: Line In gain
• IGn: Direct Input gain
Gain is controlled by the encoder.
To open the Mic Pre window for a track:
Hold the Ctrl/Win Modifier switch and press
the encoder switch for the track.
To exit Mic Pre view, do any of the following:
Press the lit Mic Pre switch.
Enter another view.
Expanded Mic Pre View
You can display all of the PRE controls for a
channel in Expanded Mic Pre view.
To display the PRE controls for a channel in
Expanded Mic Pre view:
Press the Mic Pre switch.
1
Press the encoder switch that corresponds to
2
the channel you want to display.