DigiDesign C 24 Manual page 54

Edit Switches
The Edit switches directly execute the corre-
sponding command in Pro Tools. The switches
light to indicate which functions are available.
Copy and Paste Switches
The Copy and Paste switches carry out the COpy
and Paste commands in the Pro Tools Edit
menu.
See "Cutting and Pasting" on page 97.
Tools & Functions Switches
Trim/ Grabber/
All Notes Off
Alt Function Select/
Wait For Note
Tools and Functions switches
Alternate Function Switch
The Alternate Function switch selects the top or
bottom command for the dual-function
switches in this section.
When the Alternate Function switch is off, the
top function is active for all switches in this sec-
tion.
When the Alternate Function switch is on, the
bottom function is active for all switches in this
section.
Edit Tools
Trim Selects the Trim tool and cycles through
the versions of the tool.
Select Selects the Selector tool.
46 C|24 Guide
Smart/ Link Trk-Edit/
Click Merge-Rec Zoom Tog
Pencil/ Link Edit-TL/
Count Off Tab to Trsnt
Grabber Selects the Grabber tool and cycles
through the versions of the tool.
Pencil Selects the Pencil tool and cycles through
the versions of the tool.
Smart Selects the Smart Tool.
The Smart Tool can also be selected by simulta-
neously pressing any combination of the Trim,
Select, and Grabber switches.
Link Edit and Timeline
Toggles the Link Timeline and Edit Selection op-
tion. The switch lights when the option is se-
lected.
Link Track and Edit Selection
Toggles the Link Track and Edit Selection op-
tion. The switch lights when the option is se-
lected.
MIDI Commands and Controls
All Notes Off Executes the All MIDI Notes Off
command.
Wait For Note Enables Wait for Note in the
Transport window. The switch lights when Wait
for Note is enabled.
Click Enables the Metronome Click in the Trans-
port window. The switch lights when Metro-
nome Click is enabled.
Count Off Enables the Countoff in the Transport
window. The switch lights when Countoff is en-
abled.
Merge-Record Enables MIDI Merge recording in
the Transport window. The switch lights when
MIDI Merge is enabled.