Channel Views - DigiDesign C 24 Manual

Muting Sends in Sends Console View
To toggle the mute status of a track's send:
In the Channel Bar, press the Sends switch
1
that corresponds to the name of Send position
you want to mute.
In the Switch Functions section, press the
2
Send Mute switch to assign control of Send
Mute to the encoder switches.
Press the channel's encoder switch.
3
When the send is muted, the switch is lit and
the LCD display temporarily shows "Mute."
When the send is not muted, the switch is un-
lit and the LCD display temporarily shows "No-
Mute."
Setting the Pre-/Post-Fader Status of
Sends in Sends Console View
To toggle the pre-/post-fader status of a track's
send:
In the Channel Bar, press the Sends switch
1
that corresponds to the name of the Send posi-
tion you want to change.
In the Switch Functions section, press the
2
Pre/Post switch to assign control of pre-/post-
fader status to the encoder switches.
Press the channel's encoder switch.
3
When the send is pre-fader, the switch is lit
and the LCD display temporarily shows "Pre."
When the send is post-fader, the switch is un-
lit and the LCD display temporarily shows
"Post."
To exit Send Console view:
Press the lit Sends switch in the Channel Bar.
– or –
Enter another view.

Channel Views

C|24 Channel views let you focus all of a track's
pan controls, send controls, or inserts on a sin-
gle track in the C|24 LCD displays.
Pan/Send Channel View
In Pan/Send Channel view, Pan and Send con-
trols on the focused channel are displayed hori-
zontally across the LCD displays.
A track is focused in this view by pressing the
Send switch in its channel strip.
To display the Sends on a track:
Press the Send switch in the track's channel
1
strip. The switch flashes to indicate track focus.
If necessary, do one of the following:
2
• To display Sends A-E, press the Left Chan-
nel Bar Scroll switch.
– or –
• To display Sends F-J, press the Right Chan-
nel Bar Scroll switch.
The left side of the LCD display shows the
track name in the top row and "Pan/Send" in
the bottom row, followed by "Main Pan" in the
top row and the channel pan value in the bot-
tom row.
For each assigned Send on the track, the LCD
display shows Send position, Send path, "Snd-
Pan" on the top row, and Send mute state,
"more" and Send pre/post state on the bottom
row.
For each Send position without an assign-
ment, the LCD display shows "No Send" on the
top row, and "assign" on the bottom row.
Chapter 8: Operating Views and Modes 69