Fader Display Modes - DigiDesign C24 Manual

Fader Display Modes

Normal Mode
In Normal mode, Pro Tools tracks are displayed
on C|24 in a standard console format. In this
mode, each channel strip corresponds to a track
in the session, and most of the channel strip
controls correspond directly to on-screen con-
trols or views in Pro Tools:
• Faders control channel volume.
• LCD displays show track name, and track
volume when fader is touched.
• Rotary encoders control channel pan.
• In Insert views, rotary encoders and en-
coder switches control inserts and plug-in
parameters.
• In Send views, rotary encoders and encoder
switches control Send pan, mute, and pre-
post fader operation.
Master Faders Mode
The Masters switch cycles temporary display of
Master Fader tracks and VCA Master tracks
(Pro Tools HD only) on the right side of the C|24
faders. The Masters switch flashes to indicate
display of Master Faders or VCA Master tracks.
Flip Modes
Flip mode temporarily exchanges control
assignments between the rotary encoders and
the corresponding channel faders, so you can
use the touch-sensitive faders to edit and
automate pan, send and plug-in parameter
values.
The effect of Flip mode depends on the current
view.
86 C|24 Guide
Home/Pan Flip Mode
When C|24 is in Pan Console or "Home" view,
Flip mode transfers control assignments as fol-
lows:
• Faders control channel pan.
• Rotary encoders control channel volume.
When an Instrument track is in MIDI mode, Flip
mode transfers control assignments as follows:
• Faders control MIDI pan.
• Rotary encoders control MIDI volume.
Send Flip Mode
Flip mode transfers Send control assignments as
follows:
Sends Console View
• Faders control Send level.
• Rotary encoders control Send pan.
• For stereo Sends, control of Left and Right
channel pan is selected with the L/R switch
in the Pan section.
• For Sends to multichannel output paths,
control of Send Pan parameters is selected
in the Pan section of the Channel Bar
• Encoder switches control Send Mute or
Send Pre/Post status, depending on the
Switch Functions setting
Pan/Sends Channel View
• Fader under "Main Pan" controls channel
pan.
• Fader under Send position name controls
Send level.
• Fader under "SndPan" controls Send pan.
• Encoder switch under "Mute" controls
Send mute.
• Encoder switch under "SndPan" controls
Send pre/post operation.