DigiDesign C24 Manual page 87

To focus a plug-in:
Press the Insert switch in the track's channel
1
strip.
Press the encoder switch to the left of the
2
"more" encoder switch for the plug-in. An aster-
isk ("*") appears below the Insert position to in-
dicate that the plug-in is focused.
Opening Plug-in Windows
You can focus a plug-in on C|24 with or without
displaying its window on-screen.
To set C|24 to automatically open windows of
focused plug-ins:
Press the Soft Keys switch.
1
Press the encoder switch that corresponds to
2
"ChanWn" so that its value is "Yes."
Press the lit Soft Keys switch.
3
With this preference set to "Yes," when you as-
sign or focus a plug-in, the plug-in window will
open automatically on-screen.
To focus a plug-in on C|24 and open its window:
Press the Insert switch of the track whose plug-
1
in you want to focus.
Press the encoder switch that corresponds to
2
the Insert position for the plug-in.
The focused plug-in is indicated on C|24 by an
asterisk below the Insert position.
To open or close a plug-in window on-screen for an
Insert without focusing it on C|24:
Press the Insert switch in the track's channel
1
strip.
Hold the Ctrl/Win Modifier switch and press
2
the encoder switch that corresponds to "more"
for the plug-in.
To open multiple plug-in windows:
Hold the Shift (add) Modifier switch while
opening each new plug-in window.
To close all open plug-in windows:
Hold the Opt/Alt (all) Modifier switch and
press the Plug-in switch in the Windows section.
Bypassing Plug-ins
When a plug-in is bypassed, the LCD display
shows "BYPASS" (all uppercase) and the plug-in
name changes to all uppercase.
When an plug-in is not bypassed, the LCD dis-
play shows "bypass" (lowercase) and the plug-in
name changes to all lowercase.
To toggle the bypass state of a plug-in:
Press the Insert switch in the track's channel
1
strip.
Press the encoder switch that corresponds to
2
"bypass."
To toggle the bypass state of all plug-ins on a
track:
Press the Insert switch in the track's channel
1
strip.
Press the Mstr Bypass switch in the Inserts sec-
2
tion of the Channel Bar.
– or –
Press the Insert/Send Bypass switch so that it is
1
lit.
Press the Insert switch in the track's channel
2
strip.
Chapter 8: Operating Views and Modes 79