DigiDesign C24 Manual page 83

Setting the Pre-/Post-Fader Status of
Sends in Pan/Send Channel View
To toggle the pre-/post-fader state of any of the
sends on a track:
Press the Send switch in the track's channel
1
strip.
If necessary, scroll the LCD display to show
2
the Send position you want to change.
Press the encoder switch that corresponds to
3
"SndPan" to toggle the pre-/post-fader state.
To display the Output window for a track:
Press the Send switch in the track's channel
1
strip.
Hold the Ctrl/Win Modifier switch and press
2
the encoder switch that corresponds to "Main
Pan."
To exit Pan/Send Channel view, do any of the
following:
Press the flashing Sends switch in the channel
strip.
Press the encoder switch that corresponds to
"Pan/Send."
Enter another view.
Expanded Pan View
You can display all the Pan controls for a track
in Expanded Pan view.
To display the Pan controls for a track in Expanded
Pan view:
Double-press the Send switch in the track's
channel strip.
– or –
Press the Send switch in the track's channel
1
strip.
Press the encoder switch that corresponds to
2
"Main Pan."
The left side of the LCD displays the track
name in the top row and "Main Output" in the
bottom row, followed by track Mute, Solo, Auto-
mation Safe, and Volume displays.
The LCD display also shows pan parameters as
follows:
Stereo Output Path Tracks assigned to a stereo
output path show Left-Right pan. Stereo tracks
assigned to a stereo output path also show
Left/Right Pan Link and Front Inverse Link con-
trols.
Multichannel Output Path (Pro Tools HD Only)
Tracks assigned to a multichannel output path
can show Front Pan, Rear Pan, Front/Rear Pan,
Front Divergence, Rear Divergence, Front/Rear
Divergence, Center %, and LFE level, depending
on the output format. Stereo tracks assigned to a
multichannel output path also show Pan Link
controls (Left/Right Link, Front Inverse Link,
Rear Inverse Link, and Front/Rear Inverse Link).
Chapter 8: Operating Views and Modes 75