DigiDesign C24 Manual page 100

Assigning Sends
To assign a Send from Console view:
Press a Send switch in the Sends section of the
1
Channel Bar.
Press the Assign switch in the Assign section of
2
the Channel Bar.
Unassigned Send positions show the top level
3
menu for assigning Send paths: "bus" or 'in-
terfc" (Interface).
Navigate the Send paths menu by doing the
4
following:
• Turn the encoder to scroll through menu
items.
• To go down a menu level, press the encoder
switch that corresponds to the Send path.
• To go up a level, hold the Command/Ctrl
Modifier switch and press the encoder
switch that corresponds to the Send path.
On each channel where you want to make an
5
assignment, turn the rotary encoder to scroll
through the list of Send paths.
Do one of the following:
6
• To confirm each assignment separately,
press the flashing encoder switch on each
channel.
• To confirm all assignments at once, press
the flashing Assign switch in the Assign
section of the Channel Bar.
• To cancel any unconfirmed assignments
and leave Assign mode, press the flashing
Escape/Cancel switch.
92 C|24 Guide
To assign a Send from Channel view:
Press the Send switch in the track's channel
1
strip. The Send positions for the track are shown
in the LCD displays.
Press the Assign switch in the Assign section of
2
the Channel Bar.
Unassigned Send positions show the top level
3
menu for assigning Send paths: "bus" or 'in-
terfc" (Interface).
Navigate the Sends menu by doing the follow-
4
ing:
• Turn the encoder (or in Flip mode, move
the fader) to scroll through menu items.
• To go down a menu level, press the encoder
switch that corresponds to "select."
• To go up a level, press the encoder switch
that corresponds to "back."
On each channel where you want to make an
5
assignment, turn the rotary encoder to scroll
through the list of Send paths.
Do one of the following:
6
• To confirm each assignment separately,
press the flashing encoder switch on each
channel.
• To confirm all assignments at once, press
the flashing Assign switch in the Assign
section of the Channel Bar.
• To cancel any unconfirmed assignments
and leave Assign mode, press the flashing
Escape/Cancel switch.