Initialising The Printer - 3D Printing Systems UP Plus 3D Manual

3.1.5 Initialising the Printer

ing the Printer
Before anything can be printed, the printer must be Before anything can be printed, the printer must be initialised. Click the "Initialis
the "3D print" menu. The printer will beep and the initialisation procedure will begin. The printer the "3D print" menu. The printer will beep and the
will then return the platform and print head to the pri
(Windows version)
TIP: If your printer is not responding properly, the first thing to try is to re If your printer is not responding properly, the first thing to try is to re-initialis
clicking the 'Initialise' option from the '3D Print' me e' option from the '3D Print' menu. If still not working switch off and on the
printer at the back. Check the printer at the back. Check the printer driver's trouble shooting section. The printer can also be
tialised by pressing the front switch on the printer. ed by pressing the front switch on the printer.
UP Plus 3D Printer User Manual 3D Printer User Manual
and print head to the printer's origin and beep again when it is ready. nter's origin and beep again when it is ready.
(Mac version) (Mac version)
4. Troubleshooting Troubleshooting
Initialise" option under
ation procedure will begin. The printer
initialise the printer by
nu. If still not working switch off and on the
The printer can also be ini-
v 2013.6.10