3D Printing Systems UP Plus 3D Manual page 14

13. Open the software, then click "3D Print" and then " Open the software, then click "3D Print" and then "Ini-
tialise". The printer should align each of its 3 axis e". The printer should align each of its 3 axis.
X axis – the platform
Z axis – platform up &
Y axis – head moves left and right and then beeps. head moves left and right and then beeps.
14. Before you can print, you need to set the height b can print, you need to set the height be-
tween the nozzle and the tween the nozzle and the platform.
15. Let the printer know you Let the printer know you have added a new spool of
material. Click "3D Print" / "Maintenance" / "New material. Click "3D Print" / "Maintenance" / "New
Spool"
16. Load the filament into the extruder head, click Load the filament into the extruder head, click "3D
Print" / "Maintenance" / "Extrude" Print" / "Maintenance" /
17. Download the test "Bunny
first print"
18. Run the software and then click Run the software and then click "Open". Locate where
you downloaded the "
19. Scale the bunny by 50%, click "Scale" and select "0.5". Scale the bunny by 50%, click "Scale" and select "0.5".
20. Click "Place" this will centre the model this will centre the model or models on
the base of the print area print area on the software.
21. Click the "Print" icon Click the "Print" icon and click "Preferences"
UP Plus 3D Printer User Manual 3D Printer User Manual
forward and backwards,
up & down,
Bunny.STL" file located under "My
"bunny.stl" file and open it.
4. Troubleshooting Troubleshooting
Chapter 3.3.1 hapter 3.3.1 Initialising the
Chapter 3.3.2 Setting the .3.2 Setting the plat-
Chapter 3.3.4 Other Mainte- Chapter 3.3.4 Other Maint
nance Options – New Spool nance Options
http://3dprintingsystems.com/s http://3dprintingsystems.com/s
Chapter 3.2.2 Loading a 3D Chapter 3.2.2 Loading a
Chapter 3.2.4 Model Chapter 3.2.4 Model
Transformations
v 2013.6.10
Printer
form Height
upport/
model