3D Printing Systems UP Plus 3D Manual page 53

If you encounter a "Winusb.dll not found" error message, please follow the steps below:
Option 1: Uninstall Older Driver Uninstall Older Driver and Automatically Install New Driver
1. Open the Windows control panel, go to the "System Properties" dialog box ontrol panel, go to the "System Properties" dialog box and then
"Hardware" page.
2. Click "Device Manager" button, and the following dialog box will popup. Find the 2. Click "Device Manager" button, and the following dialog box will popup. Find the 2. Click "Device Manager" button, and the following dialog box will popup. Find the
"3DPrinter@FreeMC" in the USB section.
3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will ap- 3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will a 3. Click the right mouse button and select the "Uninstall" option. The confirm dialog box will a
pear. Click "OK".
UP Plus 3D Printer User Manual 3D Printer User Manual
.dll not found" error message, please follow the steps below: .dll not found" error message, please follow the steps below:
e USB section.
4. Troubleshooting Troubleshooting
and then select the
v 2013.6.10