3D Printing Systems UP Plus 3D Manual page 28

Scaling the model: Click "Scale" Click "Scale", choose or input a scaling factor in the text box
scale the model uniformly by clicking the scale button again, or choose the axis around which you scale the model uniformly by clicking the scale button again, or
want to scale if you only want to scale in one direction. want to scale if you only want to scale in one direction.
Example1: Scale up the model the model uniformly by 2.0 times.
Procedures: 1. Click "Scale"; 2. Input 2.0 in the text box; 3. Click "Scale" again. Procedures: 1. Click "Scale"; 2. Input
Example2: Scale up the model
Procedures: 1. Click "Scale"; 2. Input 1.2 in the Procedures: 1. Click "Scale"; 2. Input 1.2 in the text box; 3. Click "Z axis"
Unit Conversion: This option is provided as a convenient way to convert metric models to imp This option is provided as a convenient way to convert metric models to impe- This option is provided as a convenient way to convert metric models to imp
rial, and vice versa. To convert an imperial model to metric, select the 25.4 option from the scale rial, and vice versa. To convert an
menu and click "Scale" again. To convert from metric to imperial, select the 0.03937 option and menu and click "Scale" again
click "Scale".
3.2.5 Placing models onto the build platform
Appropriately placing your models on Appropriately placing your models on the platform can have an effect on print quality.
TIP: In general, try to place your model in the centre of the platform. In general, try to place your model in the centre of the platform.
UP Plus 3D Printer User Manual 3D Printer User Manual
el by 1.2 times along the Z axis only.
imperial model to metric, select the 25.4 option from the scale
To convert from metric to imperial, select the 0.03937 option and
the build platform
the platform can have an effect on print quality.
4. Troubleshooting Troubleshooting
in the text box, and then either
around which you
v 2013.6.10