3D Printing Systems UP Plus 3D Manual page 54

4. Install the latest UP software. oftware.
5. Unplug the USB cable, then plug again. Windows will find a new device. Manually select 5. Unplug the USB cable, then plug again. Windows will find a new device. Manually 5. Unplug the USB cable, then plug again. Windows will find a new device. Manually
driver folder (Default is C:\Program files
6. There should now be a new driver section in the device manager as shown below: 6. There should now be a new driver section in the device manager as shown below: 6. There should now be a new driver section in the device manager as shown below:
Here is a video on the driver installation Here is a video on the driver installation
1. Install the latest UP software. UP software.
2. Find the "3DPrint@FreeMC" nd the "3DPrint@FreeMC" it might also be referred as "Free Motion" or "Unknown"
"Device Manager" dialog box (it should be located in the USB section). "Device Manager" dialog box
3. Select "Update Driver." in the right click menu.
UP Plus 3D Printer User Manual 3D Printer User Manual
Program files\UP\Driver or C:\Program files(X86)\UP
http://www.youtube.com/watch?v=hGYTCRYkJr4 http://www.youtube.com/watch?v=hGYTCRYkJr4
it might also be referred as "Free Motion" or "Unknown" in the
in the right click menu.
4. Troubleshooting Troubleshooting
UP\Driver);
v 2013.6.10