Saddle Stitcher Unit Of The Booklet Finisher-G1 - Canon imageRunner Advance 4051 Basic Operation Manual

4
4
Gently push the staple case back into the finisher and push down firmly until it
is securely in place .
5
5
Close the front cover of the finisher .
When closing the cover, be careful not to get your fingers caught, as this may result in personal
injury .
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition
the staples.

Saddle Stitcher Unit of the Booklet Finisher-G1

Check the location of the staple jam, and follow the procedure described below, while referring to the directions that
appear on the touch panel display, to remove the jammed staple.
• Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
• Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.
The Booklet Finisher-G1 is an optional product.
1
1
Open the front cover of the finisher .
133