Declaration Of Conformity - Tenma 72-6802 User Manual

Declaration of Conformity

We
Tenma Test Equipment / MCM Electronics
(1)650 Congress Park Drive, Centerville Ohio 45459, USA
(2)405 S.Pioneer Blvd, Springboro Ohio 45066, USA
declare, that the below mentioned product
Type of Product: Oscilloscope
Model Number: 72-6802
are herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Law of Member States
relating to Electromagnetic Compatibility (2004/108/EC, 92/31/EEC,
93/68/EEC) and Low Voltage Directive (2006/95/EC).
For the evaluation regarding the Electromagnetic Compatibility and
Low Voltage Directive, the following standards were applied:
◎ EMC
EN 61326-1: Electrical equipment for measurement, control and laboratory
use –– EMC requirements (2006)
Conducted Emission Electrical Fast Transients
Radiated Emission EN 61000-4-4: 2004
EN 55011: 1998 + A1:1999 +
A2:2002, ClassB
Current Harmonics Surge Immunity
EN 61000-3-2: 2000 + A2:2005 EN 61000-4-5: 1995 + A1:2001
Voltage Fluctuations Conducted Susceptibility
EN 61000-3-3: 1995 + A1: 2001 EN 61000-4-6: 1996 + A1:2001
+A2: 2005
Electrostatic Discharge Power Frequency Magnetic Field
EN 61000-4-2: 1995 + A1:1998 + EN 61000-4-8: 1993 + A1:2001
A2:2001
Radiated Immunity Voltage Dip/ Interruption
EN 61000-4-3: 2002 + A1:2002 EN 61000-4-11: 2004
◎ Safety
Low Voltage Equipment Directive 2006/95/EC
Safety Requirements
IEC/EN 61010-1: 2001
APPENDIX
41