Introduction - ADTRAN NetVanta 1638 Hardware Installation Manual

1.

INTRODUCTION

The NetVanta 1600 Series Gigabit Switches include the NetVanta 1638 and the NetVanta 1638P (Power over
Ethernet (PoE)).
In this document, the term NetVanta 1600 means all of the units collectively. If a statement
only applies to one particular switch, the text refers to that switch individually.
This hardware installation guide lists the NetVanta 1600 Series units' specifications, describes the physical
characteristics of the units, introduces basic functionality, and provides installation instructions.
• Physical Descriptions on page 14
• Product Specifications on page 22
• Option Modules on page 25
• Unit Installation on page 29
• NetVanta 1131 RPS/EPS on page 34
For additional information on mounting options, powering the unit, installing option modules, and installing the
NetVanta 1131 RPS/EPS refer to the following sections:
• Mounting Options on page 30
• Replacing the Power Supply on page 31
• Installing XAUI Interface Modules on page 33
• Installing the NetVanta 1131 RPS/EPS on page 37
For information on switch configuration for a specific application, refer to the configuration guides provided on
the ADTRAN Support Community. For details on the command line interface (CLI), refer to the
AOS Command Reference
http://supportforums.adtran.com.
61700568F1-34D
Guide. All other related documents are also available online at
Copyright © 2013 ADTRAN, Inc. 13