Part Identification Chart - Weider C 625 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
M6 Locknut (87)
M8 Nylon Locknut (58)
Large Washer (85)
M10 Washer (57)
M8 x 22mm Shoulder Bolt (65)
M4 x 20mm Self-tapping Screw (69)
M5 x 20mm Self-tapping Screw (64)
M6 x 16mm Screw (62)
M10 Nylon Locknut (56)
M12 Nut (84)
M10 Large Washer (80)
M8 Washer (59)
M6 Washer (82)
M5 Washer (72)
M4 Washer (33)
M6 x 63mm Screw (70)
M8 x 63mm Carriage Bolt (78)
M10 x 155mm Bolt (74)
5
M10 x 45mm Button Bolt (77)
M10 x 46mm Bolt (81)
M10 x 51mm Bolt (66)
M10 x 63mm Bolt (75)
M8 x 65mm Bolt (68)
M10 x 67mm Bolt (71)
M10 x 70mm Bolt (86)
M10 x 77mm Bolt (79)
M10 x 85mm Bolt (67)