Fault
LED
Code
Display
U1
Heavy and
Rinse LED.
U2
Heavy and
Dry LEDs.
U3
Not
displayed to
customer.
U4
Heavy and
Fast LEDs.
Fault
Machine has
• The water supply is not turned
failed to prime
with water
• Low water pressure.
within approx.
• Blocked water softener if fitted.
3 minutes.
• The inlet valve has failed.
• The machine is siphoning.
• The spray arm is not in place,
• Excessive foaming - using
• The motor has failed.
• Rotor not fitted correctly or
• The electronic controller has
• Dishes or cups / glasses
Restricted lid
travel, the lid
• Lid, lid actuators or yokes
has reached
stall current
too soon.
• Not draining completely from
Water filled too
quickly, or tub
• Excess water pressure.
failed to drain.
• Faulty fill valve.
• Diagnose and repair the fault
Advisory only
– the other tub
has a fault and
has disabled
the power
supply.
21
Possible Causes
on.
or the flapper is jammed.
tablets (not EU/GB), liquid
detergent or spilled rinse aid.
faulty.
failed.
prevent the lid from closing.
jammed.
previous fill.
in the other tub.
599464