CONTROLS
Adjusting the speedometer functions
5.22
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Querying lap time
5.23
Info
This function can be called up only if lap times are measured.
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button
The selected function flashes.
Activating a function
–
Press the button
The symbol remains on the screen and the display changes to the next
400318-01
function.
Deactivating the function
–
Press the button
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
LAP 1 appears on the left side of the display.
–
Laps 1-10 can be displayed by pressing the button
–
The button
–
Press the button
Next display mode
400321-01
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the SPEED mode.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
.
.
for 3 - 5 seconds.
briefly and repeatedly until LAP appears at the bottom right of
briefly.
has no function.
briefly.
16
briefly.
.