Setting Kilometers Or Miles; Setting The Clock - KTM 450 EXC EU Owner's Manual

CONTROLS

Setting kilometers or miles

5.20
Info
If you change the unit of measure, the ODO value is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.

Setting the clock

5.21
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
–
Press the button
Adjusting Km/h
–
Press the button
Adjusting Mph
–
Press the button
400329-01
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing the
button and the button
400330-01
Info
The seconds can only be set to zero.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h/Mph display flashes.
.
.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
.
for 3 - 5 seconds.
15
.