Important Information - KTM 450 EXC EU Owner's Manual

2012
Hide thumbs Also See for 450 EXC EU:
Table of Contents

Advertisement

IMPORTANT INFORMATION

Use definition (All EXC models)
KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com-
ply with currently valid regulations and categories of the top international motorsport organizations.
Info
The motorcycle is authorized for public road traffic in the homologous (reduced) version only.
In the derestricted version, the motorcycle must be used only on closed off property remote from public road traffic.
The motorcycle is designed for off-road sport endurance competition (Enduro) and not for the use predominantly in motocross.
Use definition (All XC‑W models)
KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com-
ply with currently valid regulations and categories of the top international motorsport organizations.
Info
The motorcycle may only be used in closed off areas remote from public road traffic.
This motorcycle is designed for use in offroad endurance competition (enduro) and not primarily for use in Motocross.
Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care and tuning work on the engine and
chassis is properly carried out as described in the owner's manual. Poor adjustment and tuning of the engine and chassis can lead to
damage and breakage of components.
Using the vehicle in difficult conditions such as on sand or very muddy or wet terrain can lead to above-average wear of components
such as the drive train or the brakes. For this reason, it may be necessary to service or replace worn parts before the limit specified in
the service schedule is reached.
Pay careful attention to the prescribed running-in period and service intervals. If you observe these exactly, you will ensure a much
longer service life for your motorcycle.
Warranty
The work prescribed in the service schedule must be carried out by an authorized KTM workshop only and confirmed in the customer's
service record and in the KTM dealer.net; otherwise, all warranty claims will be void. No warranty claim can be honored for damage
resulting from manipulation and/or other changes to the vehicle.
Fuel, oils, etc.
You should use the fuels, oils and greases according to specifications as listed in the owner's manual.
Spare parts, accessories
For your own safety, only use spare parts and accessory products that have been approved and/or recommended by KTM and have
them installed by an authorized KTM workshop. KTM accepts no liability for other products and any resulting damage or loss.
Some spare parts and accessories are specified in brackets in the respective descriptions. Your KTM dealer will be happy to advise
you.
You will find the current KTM PowerParts for your vehicle on the KTM website.
International KTM Website: http://www.ktm.com
Work rules
Special tools are necessary for some of the work. These are not included with the vehicle and can be ordered under the number in
parentheses. Ex: valve spring compressor (59029019000)
During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals and seal rings, O-rings, pins, lock washers) must be
replaced by new parts.
®
If thread lock (e.g. Loctite
) is used for screw connections, be sure to comply with the manufacturer's specific instructions on its
usage.
Parts that you want to reuse following repairs and servicing should be cleaned and checked for damage and wear. Change damaged or
worn parts.
Ensure that the vehicle is safe to operate after completing repair and maintenance work.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents