Copying With Programmed Copy Settings (Mode Memory) - Oce cm5520 User Manual

3
3.5 Copying with programmed copy settings (Mode
Memory)
Programmed copy settings can be recalled to be used again for copying.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the doc-
ument" on page 2-8.
2
Press the [Mode Memo-
ry] key.
The Recall Copy Pro-
gram screen appears.
3
Touch the button for the copy program registered with the copy set-
tings to be recalled.
– If the copy settings in the selected copy program are not to be
checked, continue with step 8.
– If the copy program to be recalled is not displayed, touch [↑] and [↓]
until the desired copy program is displayed.
3-16
Additional copy operations
cm5520