Manually Using The Finisher - Oce cm5520 User Manual

2
2.14

Manually using the finisher

If the post inserter is installed onto the finisher, the finisher can be operated
manually by using the control panel of the post inserter.
The following Finishing settings are available with each of the option config-
urations.
Finisher 9833 and post inserter
"Corner" Staple, "2 Position" Staple
Finisher 9834 and post inserter
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
Finisher 9833, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Punch settings
Finisher 9834, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
- Punch settings
Corner Staple
Reminder
Only load paper into the lower tray. Do not use the upper tray.
2-98
Center
2 Position
Staple Staple &
Fold
Basic copy operations
Tri-Fold Punch
cm5520