2. MAJOR UNIT REPLACEMENT
2.7
Replacing the Battery Terminal
1)
Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2)
Remove the Stepping Motor. (Refer to Section 2.5 Replacing the Stepping Motor.)
3)
Remove the Drive PC Board. (Refer to Section 2.6 Replacing the Drive PC Board.)
4)
Hold down the Hook and remove the Battery Terminal upward.
Hook
5)
Replace the Battery Terminal with a new one, then reassemble in the reverse order of removal.
Battery Terminal
NOTE:
Reassemble the battery terminal so that the tubes are
placed on the battery case.
2-16
Battery Terminal
EO18-33024
2.6 Replacing the Battery Terminal
Battery Case
Tube