2. MAJOR UNIT REPLACEMENT
5)
Remove the Peel-off Sensor.
6)
Replace the Peel-off Sensor with a new one, then reassemble in the reverse order of removal.
NOTES:
1. Be careful of the orientation of the Peel-off Springs as shown in the picture below when reassembling
the Peel-off Sensor Unit.
Peel-off Spring L
2. After replacing the Peel-off Sensor, refer to the Setting Operation Manual or System Mode Manual
and perform the following operations.
Perform the sensor adjustment.
Peel-off Sensor
Peel-off Sensor Unit
2-11
EO18-33024
2.4 Replacing the Peel-off Sensor
Peel-off Spring R