Replacing The Drive Pc Board - Toshiba B-EP2DL Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT
2.6

Replacing the Drive PC Board

1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2) Remove the Stepping Motor. (Refer to Section 2.5 Replacing the Stepping Motor.)
3) Remove the Screw from the Base Frame.
4) Disconnect all Connectors and FPC Cable from the Drive PC Board.
Drive PC Board
NOTE: Before disconnecting the FPC Cable, release the Connector Lock.
Connector Lock
5) Remove the Drive PC Board from the Guide.
Head FPC Cable
Drive PC Board
2-14
2.5 Replacing the Drive PC Board
T-2x5 Screw
Base Frame
FPC Cable
EO18-33024