Scanner Buttons - Microtek ScanMaker s350 Start Here Manual

Step 4: Connect Scanner (cont.)
To the Hi-Speed USB cable
D. Connect one end of the cable to your computer.
E. Connect the other end of the cable to the scanner.
F. Turn the power switch at the back panel of your scanner to "On"; the LED lights up at the
front panel of the scanner.
The system will detect your scanner automatically.
NOTE: If your computer has both
Hi-Speed USB (USB 2.0) and USB
1.1 ports, connect the cable to the
Hi-Speed USB port. Use the USB
1.1 port only if your computer does
not have Hi-Speed USB.

Scanner Buttons

The ScanMaker s450/s350 is equipped with seven scanner buttons, providing quick access to
the most frequently used functions. These buttons are Cancel/Setup, Scan, Copy, E-mail, OCR,
PDF, and Custom.
Cancel/Setup: Cancels the scanning job when the scanner is scanning. Launches the
Microtek Scanner Configuration (MSC) utility when the scanner is not scanning.
Scan: Captures images that can be saved as files or sent to an image-editing application.
Copy: Scans the image and sends it to your printer.
E-mail: Scans the image and delivers it directly to your e-mail editor.
OCR: Scans a text document, converts, and saves it in text file format. Files may be
immediately edited if configured in the MSC utility.
PDF: Scans the image and saves it in the Adobe Acrobat PDF format.
Custom: Customizes this button to perform your preferred function, such as Power
Saving, Scan, Fax, or Launch Application.
F
3
E
D