To The Hi-Speed Usb Cable; Scanner Buttons - Microtek ScanMaker i480 Start Here Manual

Step 4: Connect Scanner (cont.)

To the Hi-Speed USB cable

D. Connect one end of the cable to your computer.
E. Connect the other end of the cable to the scanner.
F. Turn the power switch at
the back panel of your
scanner to "On"; the LED
lights up at the front panel of
the scanner.
The system will detect your
scanner automatically.

Scanner Buttons

The ScanMaker i480 is equipped with seven scanner
buttons, providing quick access to the most frequently used
functions. These buttons are Cancel/Setup, Scan, Copy, E-
mail, OCR, PDF, and Custom.
Cancel/Setup: Cancels the scanning job when the scanner is scanning. Launches the
Microtek Scanner Configuration (MSC) utility when the scanner is not scanning.
Scan: Captures images that can be saved as files or sent to an image-editing application.
Copy: Scans the image and sends it to your printer.
E-mail: Scans the image and delivers it directly to your e-mail editor.
OCR: Scans a text document, converts, and saves it in text file format.
PDF: Scans the image and saves it in the Adobe Acrobat PDF format.
Custom: Customizes this button to perform your preferred function, such as Power
Saving, Scan, Fax, or Launch Application.
F
3
E
Scanner Buttons
D