Yamaha YZ250(P)/LC Owner's Service Manual page 288

CLUTCH AND PRIMARY DRIVEN GEAR
5. Install:
9
Friction plate 1
9
Clutch plate 2
NOTE:
9
Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
9
Apply the transmission oil on the friction plates
and clutch plates.
6. Install:
9
Bearing 1
9
Plain washer 2
9
Circlip 3
To push rod 1 4.
NOTE:
Apply the lithium soap base grease on the bear-
ing and plain washer.
7. Install:
9
Push rod 2 1
9
Push rod 1 2
NOTE:
9
Apply the transmission oil on the ends of the
push rod 2.
9
Install the push rod 2 with its smaller end a
toward you.
8. Install:
9
Pressure plate 1
9. Install:
9
Clutch spring 1
9
Screw (clutch spring) 2
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
4-38
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)