Steering - Yamaha YZ250(P)/LC Owner's Service Manual

EC560000

STEERING

20 Nm (2.0 m•kg, 14 ft•lb)
Extent of removal:
Extent of removal
Preparation for
removal
1
2
1 Under bracket removal 2 Bearing removal
Order Part name
STEERING REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Number plate
Handlebar
Cable guide
Front fender
1 Steering shaft nut
2 Front fork
3 Handle crown
4 Ring nut
5 Under bracket
6 Ball race cover
7 Bearing (upper)
8 Bearing (lower)
9 Ball race
STEERING
145 Nm (14.5 m•kg, 105 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "HANDLEBAR" section.
1
2 Refer to "FRONT FORK" section.
1
1 Use special tool.
Refer to "REMOVAL POINTS".
1
1
1
1 Refer to "REMOVAL POINTS".
2 Refer to "REMOVAL POINTS".
5-47
CHAS
23 Nm (2.3 m•kg, 17 ft•lb)
TIGHTENING STEPS:
9 Tighten ring nut.
38 Nm (3.8 m•kg, 27 ft•lb)
9 Loosen it one turn.
9 Retighten it.
7 Nm (0.7 m•kg, 5.1 ft•lb)
Remarks