Installing Adjustable Angle Flip-Up Footplates - Invacare Mirage User Manual

5.3 Installing Angle Adjustable Flip-up Footplate
1. Remove legrest from chair as described in section 5.1 INSTALLING/REMOVING LEGRESTS.
NOTE:
Lay the footrest on a flat surface to simplify this procedure
2. Loosen the legrest height adjustment screw using a hex-wrench.
3. Completely remove the standard footplate, including stem, from the legrest.
4. Fit Adustable Angle flip-up footplate and stem into the legrest.
5. Adjust to desired height and tighten the legrest height adjustment screw. Ensure the screw is
secure.
6. Adjust footplate. Refer to ADJUSTING ANGLE ADJUSTABLE FLIP-UP FOOTPLATES in this
section of the manual.
36