Setting The 9840 Write-Protect Switch; Figure 4-6. Setting The 9840 Write-Protect Switch - HP Surestore Tape Library Model 10/588 Hardware Manual

Library storage module

Hide thumbs Also See for Surestore Tape Library Model 10/588:

Table of Contents

Setting the 9840 Write-Protect Switch

To write-protect a cartridge, follow these steps:

1. Hold the cartridge with the customer label side up and the rear VOLSER

label toward you. (Refer to

2. Locate the write-protect switch on the right side of the cartridge.

3. Move the write-protect switch to the front of the cartridge (away from you)

to the write-protect position.

Figure 4-6 on page

4-7.)

Preparing Cartridges

4-7

Table of Contents

Do you have a question about the Surestore Tape Library Model 10/588 and is the answer not in the manual?

A4845a