6. Insert one new cleaning cartridge into a CAP cell.
CAUTION:
Do not slam the CAP. Cartridges could become unseated and be
extended out into the path of the robotics, causing severe damage to the
robot hand.
7. Close the CAP. The lock automatically engages.
a. The robot performs a brief audit.
b. The operator panel displays "MOVING CLEANING CART TO CELL."
c. The hand inserts the cartridge into its cell.
d. The operator panel displays "ONLINE CAP UNLK DISABLD" or
Operating in Manual Mode
The following text describes operations you can perform when the LSM is in
manual mode. Manual mode occurs when the LSM right front door is opened or
the LSM loses power.
Opening the LSM Front Doors
You must open the right front door, then the left front door to perform manual
operations. Refer to
1. Make sure that all jobs have ended.
2. Open the LSM right front door by using a latch key to unlock the top and
bottom latches. Turn the key counterclockwise.
3. Open the LSM left front door. For the standard door, pull gently from the
top right corner. For the expansion door, pull from the recessed area on the
right side.
"ONLINE – PRESS EXE TO UNLK CAP."
Figure
3-3.
Operating in Manual Mode
3-7