Mounting A Cartridge Into A 9840 Drive - HP Surestore Tape Library Model 10/588 Hardware Manual

Operating in Manual Mode

Mounting a Cartridge into a 9840 Drive

To mount the cartridge in a 9840 drive:
1. Insert the cartridge into the 9840 drive using the direction shown in
Figure
2. Wait for one of the following messages to display and take the appropriate
action, if necessary:
• The "Ready F" (File Protected) message displays when a write-protected
• The "Ready U" (File Unprotected) message displays when a cartridge
• The "NTReady" message displays when the tape in the cartridge has lost
• The LOADxxxx" message displays when the cartridge unsuccessfully
3-20
3-13.
cartridge loads successfully.
that is not write-protected loads successfully.
tension. If this occurs call your Customer Support Engineer
loads, where the xxxx is a fault symptom code. If this occurs call your
Customer Support Engineer.