Removing A Cartridge From The Hand; Figure 3-8. Diagnostic And Cleaning Cartridge Cell Locations - HP Surestore Tape Library Model 10/588 Hardware Manual

Operating in Manual Mode

Figure 3-8. Diagnostic and Cleaning Cartridge Cell Locations

Removing a Cartridge from the Hand

If the LSM experiences a power failure and the empty/dropoff cell is full, a
cartridge might be left in the hand. You can remove it from the hand and
manually mount it into a drive for a read/write operation.
CAUTION:
Follow the procedures described in
do so could damage the hand.
Make sure that you do not touch the TWH card on the hand assembly. It
contains ESD-sensitive components and could be damaged.
To remove a cartridge from the hand:
1. Rotate the Z column:
• If the LSM has an expansion door, move the hand until it is facing the
• If the LSM has a standard door, move the hand until it is on the left, top
3-14
expansion door location.
side of the LSM (Panel 0 Column 0).
"Moving the Robot" above. Failing to