Setting The Dlt Write-Protect Switch; Figure 4-5. Setting The Dlt Write-Protect Switch - HP Surestore Tape Library Model 10/588 Hardware Manual

Library storage module

Hide thumbs Also See for Surestore Tape Library Model 10/588:

Table of Contents

Preparing Cartridges

Setting the DLT Write-Protect Switch

Refer to

cartridge to write-protected, slide the switch to the left so the orange indicator is

visible. In this position, the drive can only read data from the tape and cannot

write data to the tape.

To set the cartridge to write-enabled, slide the switch to the right so the orange

indicator is not visible. In this position, the drive can write as well as read data.

4-6

Figure 4-5

to see the location of the write protect switch. To set the

Table of Contents

Do you have a question about the Surestore Tape Library Model 10/588 and is the answer not in the manual?

A4845a