Ejecting A Disk From The Jukebox - HP 220mx User Manual

NOTE
Operating the Jukebox

Ejecting a Disk From the Jukebox

Ejecting a Disk From the Jukebox
Some software packages require that you load and eject disks by following the
instructions in the software. If you use a software package to manage files in the
jukebox, check the software documentation before proceeding with these steps.
Start with READY, LOAD * or EJECT * in the display.
1. Press on the jukebox control panel.
EJECT
2. EJECT SLOT # displays. ("#" is flashing and the number of the first storage
slot in the jukebox that contains an optical disk.)
3. If you want to select the storage slot number that shows in the display, press
or . If you want to choose a different storage slot, press
EJECT ENTER
until the desired slot number displays and then press
PREV
on the following page.)
EJECTING displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.
4. Remove the disk from the mailslot.
You may now eject additional disks by pressing the
then following steps 2 through 4 until you are finished ejecting disks. When the
last disk is ejected, EMPTY displays briefly before returning to EJECT *.
5. Press to return to the READY state.
CANCEL
3-12
NEXT
. (See the note
ENTER
or key and
EJECT ENTER
Chapter 3
or