Operating the Jukebox
Troubleshooting
Problem
RUN ISTAT TEST
displays (this initializes
the element status)
Can't write to the disk.
*Ensure that the SCSI bus is inactive before removing power to the jukebox.
Removing power to a device on an active SCSI bus can cause data loss and/or
problems with the SCSI interface.
3-40
What to do
•
Power cycle the jukebox.*
Run the
•
INIT ELEM
menu
TEST *
•
If steps above do not result in a READY display,
call your service representative.
•
Check the host file system access permissions.
•
Eject the disk and check that the write-protect
tab on each side of the disk is in the
write-enabled position.
•
Check your application software.
•
If steps above are unsuccessful, call your service
representative.
STATUS test under the
Chapter 3