User Roles (Capabilities); Using The Negation Form - Mellanox Technologies Mellanox SX1018 Command Reference Manual

switch [standalone: master] (config) #
The following session shows how to move between command modes:
switch [standalone: master] >
switch [standalone: master] > enable
switch [standalone: master] #
switch [standalone: master] # configure terminal
switch [standalone: master] (config) #
switch [standalone: master] (config) # exit
switch [standalone: master] #
switch [standalone: master] # disable
switch [standalone: master] >
Commands that succeed do not print any response and simply show the command prompt after
you press <Enter>.
If an error is encountered in executing a command, the response will begin with "%", followed by
some text describing the error.

1.5 User Roles (Capabilities)

There are two user roles or account types: admin and monitor. As "admin", the user is privileged to
run all the available commands. As "monitor", the user can run commands that show system con-
figuration and status, or set terminal settings.
Table 7 - User Roles (Accounts) and Default Passwords
User Role
admin
monitor

1.6 Using the Negation Form

Several Config mode commands offer the negation form using the keyword "no". This no form
can be used to disable a function or to cancel certain command parameters or options. To re-enable
a function or to set cancelled command parameters or options, enter the command without the
"no" keyword (with parameter values if necessary).
The following example performs the following actions:
1. Displays the current CLI session options.
2. Disables auto-logout.
3. Displays the new CLI session options (auto-logout is disabled).
4. Re-enables auto-logout (after 15 minutes).
5. Displays the final CLI session options (auto-logout is enabled)
// 1. Display the current CLI session options
(Config mode)
(You start in Standard mode)
(Move to Enable mode)
(You are in Enable mode)
(Move to Config mode)
(You are in Config mode)
(Exit Config mode)
(You are back in Enable mode)
(Exit Enable mode)
(You are back in Standard mode)
Default Password
admin
monitor
Mellanox® Technologies Confidential
Rev 1.6.9
Mellanox Technologies 21